Digiflavor Etna 18mm Bf Mtl Rda

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare

$39.99 $9.99

Digiflavor introduces the ETNA 18mm BF MTL RDA, a single coil build deck atomizer with an interchangeable airflow modules. The ETNA 18mm RDA has an 18mm build deck and utilizes a 10mm juice well for your favorite E-Liquid along with three interchangeable internal airflow modules.

Digiflavor Etna 18mm Bf Mtl Rda
Digiflavor Etna 18mm Bf Mtl Rda

$39.99 $9.99

Description

DIGIFLAVOR ETNA 18MM BF MTL RDA

Designed in Italy

Digiflavor introduces the ETNA 18mm BF MTL RDA, a single coil build deck atomizer with an interchangeable airflow modules. The ETNA 18mm RDA has an 18mm build deck and utilizes a 10mm juice well for your favorite E-Liquid along with three interchangeable internal airflow modules. Each module comes with unique air flow: a double 0.8mm slot, a triple 0.8mm slot, and a single 1.2mm slot. The modules can be changed by removing the threaded hex air flow. The build deck accommodates smaller single performance coil builds typically used for mouth-to-lung, with a terminal width of 2mm. The top cap is designed with a ridge in order to align the airflow with the build deck. The gold plated 510 connection of the ETNA 18mm can be changed with a 510 squonk pin. The ETNA also comes with two frosted acrylic 6mm wide bore 510 drip tips of varying heights; 17mm and 20mm. The ETNA is pre-installed with a heat dissipation ring placed on top the top cap. The ETNA 18mm BF MTL RDA by Digiflavor is an excellent smaller form RDA that delivers on flavor and tight air flow.

Due to the nature of this sale, all sales are final and no refunds or exchanges will be accepted. Store Credit may be permitted if item is defective on arrival.

PRODUCT SPECIFICATIONS

DIGIFLAVOR ETNA MTL SQUONK RDA

  • 18mm Diameter
    • 35mm Tall
  • Two Post, Single Terminal Build Deck
    • 2mm Wide Terminal
    • PEEK Insulated Positive Post
    • Top Mounted Flathead Screws
    • Interchangeable Airflow Modules
    • Dual Wicking Ports
    • 10mm Juice Well
  • Single Hex Side Air Slot
    • 4.5mm Hex Air Slot
    • Interchangeable Airflow Modules
      • Double 0.8mm Air Slots
      • Triple 0.8mm Air Slots
      • Single 1.2mm Air Slot
  • 6mm Bore Acrylic Drip Tips
    • 17mm Tall
      • Pre-Installed
    • 20mm Tall
  • Gold Plated 510 Pin
    • Squonk Pin Capable

 

PRODUCT INCLUDES
  • Digiflavor ETNA 18mm BF MTL RDA
  • Three Airflow Modules
  • One Spare Drip Tip
  • One Allen Key
  • One Hex Wrench
  • Two Agleted Cotton
  • Six Pre-built Coils
  • One BF Squonk Pin
  • One Spare Parts Pack
  • One User Manual

Videos

Videos: Digiflavor Etna 18mm Bf Mtl Rda

Reviews (21)

21 reviews for Digiflavor Etna 18mm Bf Mtl Rda

4.7 out of 5
14
7
0
0
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Tony D.

    “A LOT OF FLAVOR.
    This little MTL has a lot of flavor I really like it.”

    Helpful(0) Unhelpful(0)You have already voted this
  2. Joseph Gamblin

    “GREAT AND SIMPLE MTL RDA
    Easy to set up. Squonks perfectly. Great flavor. Zero issues!”

    Helpful(0) Unhelpful(0)You have already voted this
  3. Jason

    “BEAUTY RING ISSUE
    I also picked this up to use on the Simple EX, and am really enjoying it. Great flavor, looks fantastic on the EX (except for the big *** gold screw… really wish they would have gone with SS or matched colors). I haven’t had any issues with the tightness or o-rings yet. There seems to have been batches that were shipped without the beauty rings, though. I’ve read some boards and Geekvape, Digiflavor’s parent company, was resolving the problem and sending the beauty rings to those who received items missing them, though you might have to send unboxing evidence. Apparently some retailers have been opening the boxes and putting the missing o-rings onto the items that were shipped without them (kudos to those who are doing that… customer service above and beyond). Some sites also have authentic beauty rings available for purchase. For the price I paid here at Vapor DNA for a pretty good atty that completes a stealth MTL setup brilliantly, and obtaining a beauty ring from another site, I really can’t complain. Overall, a great $14 total investment!”

    Helpful(0) Unhelpful(0)You have already voted this
  4. Anonymous

    “BEST MTL ATTY I’VE USED
    The airflow options are great. The build deck is EXTREMELY easy to build on. I can’t stress that enough. It’s by far my favorite MTL atty however there are two caveats. Neither of two that I bought came with beauty rings(even though there’s space for them in the cutout of the packaging. Also, the cap goes on way tight. It’s a serious PITA to get the cap off and it’s starting to deform the o-rings on the base when putting it back on. Fix those two things and this becomes the best MTL rda in the galaxy.”

    Helpful(0) Unhelpful(0)You have already voted this
  5. Justin K.

    “TAKE THIS WITH A GRAIN OF SALT. FIRST IMPRESSION.
    After purchasing the Simple EX kit some time back, I figured being on sale I’d try a different MTL dripper.
    First off I got this in blue, and it looks fantastic, pull the top cap off and the machining looks pretty good too. I installed the included clapton coil and wicked it with Cotn Threads. The flavor isn’t bad, just the draw isn’t right for me. If it came with all of the optional airflow adapters they made for this maybe I would have found a setting I like. I like it enough to use it from time to time, but it definitely will not be a frequently used piece. Do I regret buying the Etna? Nope. Hopefully this helps someone.”

    Helpful(0) Unhelpful(0)You have already voted this
  6. MICHAEL B.

    “It works a nice
    It works really nice would have been a five-star but it was missing the beauty ring on the bottom of the dripper will be purchasing more”

    Helpful(0) Unhelpful(0)You have already voted this
  7. Randy F.

    “Awesome, tiny RDA!
    I ordered this to top my Simple EX mod. The Simple EX RDA is pretty good, but the ETNA 18 mm MTL RDA takes the setup to another level. I love it.”

    Helpful(0) Unhelpful(0)You have already voted this
  8. Scott C.

    “Digiflavor Etna MTL RDA is a winner
    Best MTL RDA out there IMO. Great flavor, easy deck to build on & don’t let the ‘strange’ airflow screw keep you from buying it, it works fine. The form factor is very narrow, so a mod that is slim, like the diameter of a 18650 would be perfect for this RDA. Also, at 5 bucks, this is a no-brainer….GET IT!!!!”

    Helpful(0) Unhelpful(0)You have already voted this
  9. William A.

    “Great
    Awesome little build. Love the way it hits.”

    Helpful(0) Unhelpful(0)You have already voted this
  10. Adam B.

    “Nice little flavor rda.
    This rda has very good flavor and is perfect if you like mtl vaping. Very easy to build on and has a deep well for dripping or squonking.”

    Helpful(0) Unhelpful(0)You have already voted this
  11. Jack D.

    “Pure Mtl
    Extremely tight draw. This is a great compact mtl atomizer. Easy to build and customize. Flavor is middle ground with the flavors I used. Still a great deal for people looking for an inexpensive mtl.”

    Helpful(0) Unhelpful(0)You have already voted this
  12. Michael S.

    “Good rda
    Its a good rda, i would have gave it 5 stars but it didn’t come with the 22mm beauty ring. But for $5 i cant complain too much it is a good rda”

    Helpful(0) Unhelpful(0)You have already voted this
  13. Charles G.

    “To tight on the air
    To tight on the air flow.”

    Helpful(0) Unhelpful(0)You have already voted this
  14. edward m.

    “Great for the rite person
    1st off…if your gonna have extra airflow blocks…include them and raise the price or at MINIMUM make enough so people can purchase them(I cant find any in stock)great for thin”

    Helpful(0) Unhelpful(0)You have already voted this
  15. Mike M.

    “Vtx
    Outstanding service and price thank you for a great product and service..”

    Helpful(0) Unhelpful(0)You have already voted this
  16. Nathan M.

    “Do it.
    Great build deck. It’s super easy to build on and the squonk is great. The only downside to this atty is the top O-ring on the base will get sliced up easily due to the sharp edge of the top caps air intake… Even when we’ll lubricated. That being said I would buy the atty again and actually am going to buy another one.”

    Helpful(0) Unhelpful(0)You have already voted this
  17. James R.

    “Mtl Bliss
    Love the MTL draw I get with small two hole block(pre-installed).
    Great flavor, easy to build.”

    Helpful(0) Unhelpful(0)You have already voted this
  18. Seran L.

    “Classic way to vape
    I started my vaping journey in 2009. Most of the vape gear available at that time was intended for MTL. Being a smoker at the time, it was easy to adapt, but I never was able to quit smoking completely until I purchased my first sub-ohm setup in 2016. I started building coils in 2018, mixing eliquid earlier this year, and for some reason I began to long for a good MTL vape, knowing that I could now customize my experience and really get the most out of it.
    I decided to try the Etna since I’m fond of drippers and it’s cheap here on MFS. At first I was a little disappointed, but after trying a couple different builds and letting my juice steep a bit longer, I find myself really enjoying it. It’s a much more relaxing way to vape, and also draws less attention in public places.
    The RDA itself feels pretty good, though I wish I hadn’t chosen the “”rainbow”” finish. It’s really just purple/blue/yellow, not nearly as broad spectrum as some other rainbow atties. Other than wishing I’d chosen plain steel finish, I can’t say I have any regrets in purchasing the Etna. It hasnt leaked a drop, is almost TOO easy to build on, produces good, satisfying flavor, and is great for stealth vaping. At $18, I would absolutely buy another if something unfortunate happened. Try one!”

    Helpful(0) Unhelpful(0)You have already voted this
  19. Willard S.

    “Not great, but OK
    Good flavor, a little tough to build on, but not bad. Biggest drawback (as with so many squonk decks), is that one can’t see the amount of juice that’s being squonked. If the housing was clear pyrex, or glass, the problem with either dry hits or flooding could be avoided. As it is, you have to guess when you’ve pumped the right amount of liquid to the coil.”

    Helpful(0) Unhelpful(0)You have already voted this
  20. Kevin N.

    “Groovy
    Easy to build and wick deck for first timers. Comes clean, free of machining oil and burrs. Only issue is finding the optional airflow blocks, which for some reason this website and every other one I have tried, does not carry them.”

    Helpful(0) Unhelpful(0)You have already voted this
  21. Jody Battles

    “Etna
    Nice mtl arty for 20 bucks! Nice flavor and easy to build. Would recommend.”

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    Vapecp
    Login/Register access is temporary disabled
    Compare items
    • Total (0)
    Compare
    0