Geekvape Ammit 22mm Mtl Rda

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare

$39.99 $12.99

GeekVape presents the Ammit 22mm MTL RDA, a single coil Mouth-to-Lung RDA with a unique 3D air flow and a dual chambered top cap for a versatile vaping experience. The build deck sports a dual post, single terminal deck, with top mounted Phillips screws and a PEEK insulated positive post.

Geekvape Ammit 22mm Mtl Rda
Geekvape Ammit 22mm Mtl Rda

$39.99 $12.99

Description

GEEKVAPE AMMIT 22MM MTL RDA

GeekVape presents the Ammit 22mm MTL RDA, a single coil Mouth-to-Lung RDA with a unique 3D air flow and a dual chambered top cap for a versatile vaping experience. The build deck sports a dual post, single terminal deck, with top mounted Phillips screws and a PEEK insulated positive post. The Ammit’s unique 3D airflow consists of a dual chambered top cap for heat dissipation and directing airflow from the air ports located on the top ring of the cap directly to the coil. The top cap has an adjustable ring with two different air ports; one 12mm wide air port that allows for more airflow, and 2mm air port on the other side of the ring for a tighter draw. These two types of air ports allow up to 12 different configurations. The drip tip for the Ammit is threaded and must be screwed on to the drip tip base. The drip tip base has two o-rings allowing it to be easily removed for easily re-wetting the installed coils. The GeekVape Ammit 22mm MTL RDA has dual wicking ports that lead into a 9mm deep juice well that complements both bottom fed and drip builds. This package comes with three interchangeable drip tips: a 3mm Delrin Tip, a 2mm Delrin tip, and a 3mm Stainless Steel Tip. The Ammit has a recommended wattage range of 15 to 20W. The contact point for the Ammit is a standard gold plated 510 pin. The GeekVape Ammit is a beautifully designed MTL RDA for users looking for a tighter and unique vaping experience!

RIP TRIPPERS REVIEWS THE GEEKVAPE AMMIT 22MM MTL RDA

Due to the nature of this sale, all sales are final and no refunds or exchanges will be accepted. Store Credit may be permitted if item is defective on arrival.

PRODUCT SPECIFICATIONS

GEEKVAPE AMMIT MTL RDA

  • 22mm Diameter
  • Two Post, Single Terminal Build Deck
    • PEEK Insulated Positive Post
    • Top Mounted Phillips Screws
  • Top to Bottom Adjustable 3D Air Flow
    • Directs Airflow from Top to Coil to Driptip
    • Dual-Chambered Top Cap for Airflow and Heat Dissapation
    • 12 Airflow Configurations
      • 12mm Notched Airflow Adjustment Ring
      • 2mm Narrow Air Port
  • Recommended Wattage of 15 to 20W
  • Dual Wicking Ports
    • 9mm Juice Well
  • Three Threaded MTL Drip Tips to Choose From
    • Short 3mm Diameter Delrin
    • Short 2mm Diameter Delrin
    • Tall 3mm Diameter Stainless Steel
  • Easy to Remove Drip Tip Base
  • Gold Plated 510 Threaded Contact Point

 

PRODUCT INCLUDES
  • One Ammit 22mm MTL RDA
  • One 3mm Stainless Steel Drip Tip
  • One 2mm Drip Tip
  • One 3mm Drip Tip
  • One Allen Key
  • One Spare Parts Pack
  • One Flathead Screwdriver
  • Two Clapton Coils (0.7 ohm)
  • One User Manual

Videos

Videos: Geekvape Ammit 22mm Mtl Rda

Reviews (37)

37 reviews for Geekvape Ammit 22mm Mtl Rda

4.8 out of 5
28
9
0
0
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Stef

    “PRETTY GOOD
    More for restricted DTL. But it is 22mm and bf. Pretty versatile.”

    Helpful(0) Unhelpful(0)You have already voted this
  2. Stef

    “PRETTY GOOD
    Flavor is pretty good and easy to build. Airflow holes give you a lot of variety from MTL to restricted DTL”

    Helpful(0) Unhelpful(0)You have already voted this
  3. Kristi H.

    “WHOOPS PURCHASE
    I thought I was ordering an RTA, so I haven’t used this tank. It’s pretty, I just have no interest in a MTL RDA.”

    Helpful(0) Unhelpful(0)You have already voted this
  4. Bryan W.

    “SUPER EXCITED THEN SUPER LET DOWN
    First time removing top cap obrings tore. Installed new set and they tore as well during top cap install even when being lubed up. Rda is pretty much useless till I can located replacement o rings”

    Helpful(0) Unhelpful(0)You have already voted this
  5. Brian M.

    “SMOOTH AND FLAVORFUL…BUT…
    First one was unusable. Two nicks in the threads, the center pin was bottomed out and yet the deck was loose. On top of that the cap was so tight it was pushing the rings out of the grooves. Never seen so many defects on a single item like that before. It was a clearance item so V-DNA me a partial credit and since I really wanted to try it, I re-ordered.

    The second one is defect free. I love the cap/liner intake design and flavor is top notch. There’s enough airflow for a restricted lung hit but it’s obviously made for small MTL size coils if you want any room for juice. The biggest flaw is that the air inlet ports next to the coils are pretty much at the same level as the center of the deck. Any juice that goes above the wick wells flows into the ports and downward, as the outboard intakes are lower than the inboards. Unless you were to squeeze very slowly, a squonk pin would merely flow juice down the intakes…and out.

    Hits nicely and gives good flavor, just not too sure about how it’s going to work with a squonker.”

    Helpful(0) Unhelpful(0)You have already voted this
  6. Bruce B.

    “FIRST RDA
    Quality is top notch, pretty ready to build on for a noob, get the wicking right and you’re good to go.”

    Helpful(0) Unhelpful(0)You have already voted this
  7. Jimmy T.

    “BEST SERVICE
    You guys are super patient and the prices are great
    I will recommend to others
    Jimmy”

    Helpful(0) Unhelpful(0)You have already voted this
  8. Lee Martinez

    “SINGLE COIL SATISFACFION
    Excellent little adomizer for mouth to lung use. The adjustable airflow makes it easy to find that perfect spot for vapor and flavor. Low wattage build is great for battery life.”

    Helpful(0) Unhelpful(0)You have already voted this
  9. rynther

    “EXCELLENT TIP
    I’m a big fan of single coil RDA’s, I play with a number of different vaping styles, from MTL to fog machine, I’ve been vaping a while now, so I’ve seen quite a few arrangements. This is something special, it’s in the same class as the maze v3, and frankly I was surprised. The pictures and description don’t quite capture the real reason to buy this tip.

    This is a top airflow design with an inner “”bell”” for the vaping chamber, very pocket friendly. The air slots feed under the coil, with the “”choke point”” of airflow at the vent just under the coil. The airflow is easy to dial down and the hit is good. The juice well is very deep, and the squonk pin feeds liquid under the coil bed into the juice well. (that part is a mixed bag for me, I do kinda like to see the juice)

    It’s a well thought out, well made tip, it works well in the 7-15w bracket, making it good for high nicotine liquids.

    Best feature: Airflow Worst feature: No spitback trap/arrestor (a small heatsink in line with the drip tip will create a gap in the airway if you need to improv a spitback trap)”

    Helpful(0) Unhelpful(0)You have already voted this
  10. Anonymous

    “GREAT WITH SQUONKER
    Love to use on my squonk mod works great”

    Helpful(0) Unhelpful(0)You have already voted this
  11. Alan S

    “A PLEASURE
    The ammit MTL is a pleasure to vape on..my best flavor build is a .5 ohm coil…either a simple clapton or just round wire…flavor just screams..but i vape fruits mostly..it a worth have atty..plus Vapordna is my go to shop for selection on great products,,,”

    Helpful(0) Unhelpful(0)You have already voted this
  12. Jerome T

    “VERY NICE AND EASY!!
    Outstanding flavor from this and simple to build single coil”

    Helpful(0) Unhelpful(0)You have already voted this
  13. Ernie W

    “Great MTL
    The AMMIT MTL RDA is a true mouth to lung RTA you can get that very tight draw also a restricted direct lung. Don’t even worry about leaking when you squonk, due to the top air flow. Flavor is good 👌 and with the three different drip tips you can fine tune this RDA 🤘I recommend this 💯”

    Helpful(0) Unhelpful(0)You have already voted this
  14. MATTHEW O

    “Matthew
    Very great mtl. It like a high end Rda. Awesome flavor and Vapor for a mtl”

    Helpful(0) Unhelpful(0)You have already voted this
  15. James R

    “Great little RDA
    Looks good on my Pulse 80, Easy to build,plenty of MTL adjustments to fit your liking and best of all NO LEAKING.”

    Helpful(0) Unhelpful(0)You have already voted this
  16. Shari H

    “I would recommend this RDA
    this is one of the best the flavor is very good. I would recommend this product.”

    Helpful(0) Unhelpful(0)You have already voted this
  17. Daniel B

    “A classic
    If you like a little more loose MTL this is your baby. Great flavor”

    Helpful(0) Unhelpful(0)You have already voted this
  18. Christopher B

    “Reduced chamber flavor rda
    I put this on my favorite mechanical squonk box mod and it hasn’t been put down since I got this. I enjoy the adjustments for airflow on this rda, if I want a mtl, I can vape that way, but if I want a more airy vape, I can get that too.”

    Helpful(0) Unhelpful(0)You have already voted this
  19. Annie K

    “Awesome MTL
    Great flavor and cloud production. Easy to build”

    Helpful(0) Unhelpful(0)You have already voted this
  20. Melanie G

    “Love it
    No leaks, better inhale, more clouds, taste the just flavor better. Hope it stays like this. Comes with a few different tips.”

    Helpful(0) Unhelpful(0)You have already voted this
  21. Joel M

    “Great mtl and great flavor.
    Great mtl and great flavor.”

    Helpful(0) Unhelpful(0)You have already voted this
  22. Paul F

    “Awesome! Love it and the
    Awesome! Love it and the fast delivery. Will definitely shop with you again”

    Helpful(0) Unhelpful(0)You have already voted this
  23. Paul L

    “Great for MTL
    If your an ex smoker and like a stiff draw off your ecig, this was built for us. I didn’t believe it was leak proof, but I sure can’t find a leak. The airflow is genius, no gurgling, no juice in the mouth. I’m gonna buy two more. Comes with three drip tips.”

    Helpful(0) Unhelpful(0)You have already voted this
  24. Sarah B

    “Easy to wick, works great,
    Easy to wick, works great, and looks beautiful”

    Helpful(0) Unhelpful(0)You have already voted this
  25. Mike S

    “Myles rda
    This is a good mtl rda I like the air flow adjustment”

    Helpful(0) Unhelpful(0)You have already voted this
  26. Kevin W

    “Great rda
    I have two now they are fantastic. Flavor is amazing and the no leak squonking is just perfect. Element vape is the best as well with very fast shipping”

    Helpful(0) Unhelpful(0)You have already voted this
  27. Wayne M

    “Decent
    Its my first RDA. It’s my first Clapton coil. I’m running 12mg Nic salts at 12w in it.

    It was easy to build, easy to clean, easy to fill, and comes with a good selection of parts. Hits good and has lots of flavor. Very wide selection on Airflow options.”

    Helpful(0) Unhelpful(0)You have already voted this
  28. David R

    “Good little atty
    Great mtl RDA , great for recticted MTL pulls, can adjust up to quite a bit of air flow”

    Helpful(0) Unhelpful(0)You have already voted this
  29. MOHAMED H.

    “It’s good
    It’s good”

    Helpful(0) Unhelpful(0)You have already voted this
  30. Jesse B

    “Ammit Mtl
    There’s a lot to like about this little rda. I’m a huge fan of the box for starters and it comes in purple. It looks great; I personally like using the shorter tip that’s plastic, haven’t really used the big euro style tip. Air flow goes from tight like jeans a size too small to watertight. I use it with air flow completely open for a tight but satisfying hit. Overall great RDA”

    Helpful(0) Unhelpful(0)You have already voted this
  31. Matthew M

    “Solid, but not great
    This little thing is good for those who don’t like a full lung, but has great flavor”

    Helpful(0) Unhelpful(0)You have already voted this
  32. Louis B

    “Works Well
    This is a atty that works well for mtl vapers. Good flavor, but not great I think because of the larger chamber. The drip tip has a conical base which helps the flavor, but not as good as my old RM2 from Robert Oneal. If you are looking for a 22mm squonker this is one to try. As I said it works well for a mtl squonker.”

    Helpful(0) Unhelpful(0)You have already voted this
  33. LISA TORRES

    I bought this for my vandy vape apollo battery. I had to think old school on this since it’s been awhile but I did get my coils to work. For this battery, kanthal coils 28g work fine. kanthal clapton coils 26-32g work too. the ss coils didn’t work. That’s ok. it works great on a squonker. I used my vandy vape pulse x with no problem at all. that was a few different coils, just to experiment. it’s easy to build. the juice chamber actually lasted awhile before I had to drip again. the flavor is really good. I’m happy with this mtl!

    Helpful(0) Unhelpful(0)You have already voted this
  34. Anonymous Person

    okay single banger, for your money get the wasp nano

    Helpful(0) Unhelpful(0)You have already voted this
  35. Ashley B.

    “Great mtl rda
    Great mtl rda”

    Helpful(0) Unhelpful(0)You have already voted this
  36. Deborah D.

    “Wasn’t impressed
    Spit back of hot juice, burn my lips, tried couple of times. Would not recommend this product.”

    Helpful(0) Unhelpful(0)You have already voted this
  37. Makale M

    “very good
    the drip tips are a bit sharp, and the metal one gets too hot. otherwise perfect little squonker.”

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    Vapecp
    Login/Register access is temporary disabled
    Compare items
    • Total (0)
    Compare
    0