Vandy Vape Mesh 24mm Rta

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare

$39.99 $19.99

Vandy Vape’s Mesh RTA is a 24mm, dual invisible clamp style postless build deck that is compatible mesh wires, a juice capacity of 2ml in it’s base form and 4ml with the replacement glass tank section.

Vandy Vape Mesh 24mm Rta
Vandy Vape Mesh 24mm Rta

$39.99 $19.99

Description

VANDY VAPE MESH 24MM RTA

Vandy Vape’s Mesh RTA is a 24mm, dual invisible clamp style postless build deck that is compatible mesh wires, a juice capacity of 2ml in it’s base form and 4ml with the replacement glass tank section. Its unique dual invisible clamp style postless build deck has two 12mm terminals with side mounted screws to secure the coil leads or mesh. Airflow enters the Mesh 24mm RTA via dual adjustable top airslots that can be fully adjusted for user preference. Included with the Mesh RTA are three drip tips, one ULTEM, Resin, one Doc drip tip, and a 510 drip tip adapter. The Mesh RTA offers a unique and versatile system for a new vaping experience!


Due to the nature of this sale, all sales are final and no refunds or exchanges will be accepted. Store Credit may be permitted if item is defective on arrival.

 

PRODUCT SPECIFICATIONS

VANDY VAPE MESH RTA

  • 24mm Diameter
  • Push to Open Top Fill Design
    • 2ml Standard Capacity
    • 4ml Maximum Capacity
      • Glass Section Switched out to Bubble Glass
  • Dual Invisible Clamp Style Postless Build Deck
    • 12mm Each Terminal
      • Side Mounted Screws
    • Mesh Wire Compatible
    • PEEK Insulator
  • Dual Top Adjustable Side Airflow
    • 10mm by 2.5mm Each Airslot
  • 24K Gold Plated 510 Contact
  • 304 Stainless Steel
  • 810 Drip Tip
    • 17.5mm Bore ULTEM Drip Tip Included
    • 18.5mm Bore Doc Drip Tip Included
    • 18mm Bore Resin Drip Tip Pre-Installed
    • 510 Drip Tip Adapter Included
  • Bottom Feed Pin
PRODUCT INCLUDES
  • One Vandy Vape Mesh 24mm RTA
  • One ULTEM 810 Drip Tip
  • One Doc 810 Drip Tip
  • One Screwdriver
  • One 510 Drip Tip Adapter
  • Mesh Wire
    • Two SS316L Mesh Wire 300 Mesh
    • Two SS316L Mesh Wire 400 Mesh
  • Spare Part Pack
  • User Manual

Videos

Videos: Vandy Vape Mesh 24mm Rta

Reviews (37)

37 reviews for Vandy Vape Mesh 24mm Rta

4.7 out of 5
26
11
0
0
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Jeremy S.

    “RTA
    It was a little difficult to wick properly but once I got it, the product worked wonderful”

    Helpful(0) Unhelpful(0)You have already voted this
  2. William Tam

    “ITS ALL IN THE WICKN
    So I know many of you guys gave up on this tank, for good reason since it is a pain in the a$$ to get the wicking spot on, the trick I learned thru trial & error is method + type. The type of wick I used to get this to function is the “”pad type”” first cut a pad in half with the grain going down (opposite from the way you would if you were setting up for a coil) then carefully pull off the outer skins & stack the two halves together then roll it tight to fit into the cavity, once that’s done use a safety pin or similar to pull the cotton at the bottom of the deck towards the juice holes to dam them to prevent slurping then fluff the top making a hole in the middle to make sure all mesh is in contact w/ wick then cut the rest a bit above the posts. pre-juice to make the wick expand. The AFC needs to be set b4 you tighten (not adjustable after… bad design) this worked for me so you can try this if you still own it.”

    Helpful(0) Unhelpful(0)You have already voted this
  3. Capn

    “I WANTED TO LOVE IT
    I was stoked to take a test drive on the mesh. I tried one at a vape shop and decided to go from coils to mesh. This tank though…
    The build was super easy. Getting a spool of mesh and cutting the strips in half was the best move. Cleaning the mesh by dry firing was way easier than with coils. It took some getting used to but I gave it all I had.
    The air flow is sub par. That was a big drawback (no pun intended). Filling the tank is slow unless you have a syringe. Even taking the tip off didn’t help much. You can’t change the gasket on top. Think I oozed out about 80mils if juice trying to figure it out. I am an experienced vaper so this is not coming from a noob.
    After a week of sipping juice and being irritated I had to shelf it and get the Kylin. The tank of my dreams. Maybe it works for some but not for me. I really wanted to love it.”

    Helpful(0) Unhelpful(0)You have already voted this
  4. Scott U

    “CAN’T WAIT TO FIGURE OUT
    Have not had good luck wicking this atomizer. I have watched every YouTube video about this and other mesh atomizers and just when I think I got it wicked right, burnt dry hit. Still going to try but it is not looking good. Probably is a better squonking vape.”

    Helpful(0) Unhelpful(0)You have already voted this
  5. chris n

    Didnt receive my product even though it says delivered

    Helpful(0) Unhelpful(0)You have already voted this
  6. Tonya G

    Great product vapordna is on point with shipping and tracking I will purchase more from you

    Helpful(0) Unhelpful(0)You have already voted this
  7. William T

    “REALLY WELL MADE
    Awesome flavors & great plumes … just make sure to keep your wicks wet if chain vape or you are going to get a dry hit”

    Helpful(0) Unhelpful(0)You have already voted this
  8. Edward L

    “NOT BAD NOT GOOD
    Really poor airflow and relatively difficult to wick just right. Wants to either spit back really bad or just give dry hits.”

    Helpful(0) Unhelpful(0)You have already voted this
  9. hollis M

    “MESH RTA
    No flavor. Lots of clouds”

    Helpful(0) Unhelpful(0)You have already voted this
  10. Jacob E

    “GREAT
    It was easy to buy, and I love it”

    Helpful(0) Unhelpful(0)You have already voted this
  11. Kenneth

    “UPDATE
    It’s been one week since I have received my RTA. I do not recommend this tank to a beginner. For myself I have only gotten the wicking process correct once and it was wonderful with ***** Brain Freeze. But whenever I filled the tank anymore then half full with the 2ml glass it would spit back half the juice in the tank. I have went to my local shop to see if they would help me in my endeavors and even the lady’s and gentlemen there could not figure out why it does this. I’ve replaced the o rings. Ive Tried different styles of wicking different lengths and I have still not found the “”perfect”” wicking method. I will keep trying to find the best method and give my results to anyone who is looking for solution for their own tank.”

    Helpful(0) Unhelpful(0)You have already voted this
  12. stuart w

    “BAD DESIGN
    This RTA is an Epic fail. Good idea but they should have thought it out a bit more before putting it on sale. Just trust me when I say do not buy it!!”

    Helpful(0) Unhelpful(0)You have already voted this
  13. Anonymous

    “K
    K”

    Helpful(0) Unhelpful(0)You have already voted this
  14. Jason M.

    “NO MESH
    To bad you don’t have the mesh for sale to go with this tank”

    Helpful(0) Unhelpful(0)You have already voted this
  15. Tony k.

    “ONCE U LEARN
    Vandy Vape makes great products by far my favorite with this rta the is a sweet spot to much cotton u end up with a Mouth full of juice to Little it doesn’t vape right so u have to find that perfect place would I buy one again no but vandy Vape is still by far my favorite the kylin and the Kensei are my favorite all time rta”

    Helpful(0) Unhelpful(0)You have already voted this
  16. Tim

    Leaks if not built right, shorts out if not built right. Flavor is gokd if you can have patience but i would pass

    Helpful(0) Unhelpful(0)You have already voted this
  17. Tara Jacobs

    First hit on this RTA I received a mouth of juice. After some tweaking I was able to use this tank and am able to see its potential of being good. It is just going to take some time to figure out the best build

    Helpful(0) Unhelpful(0)You have already voted this
  18. Justin Smet

    Took a whole day to get it to stop leaking but once I got it working right it works amazing. It isn’t like my other coil biulds but the flavor is there but I will learn how to make better builds and share what I have come up with for this rta so I get the clouds and flavor. Vandy vape should have a small thing on just wicking alone instead of alot of trial and error or looking at others

    Helpful(0) Unhelpful(0)You have already voted this
  19. Cecil Salmon

    Vandy Vape Mesh 24 RTA gives good flavor. Small clouds. The only think i didnt like about this RTA is the low air flow. If vandy vape would increase the air flow on this RTA it would be amazing.

    Helpful(0) Unhelpful(0)You have already voted this
  20. jacob macgown

    the flavor is top notch and the airflow is restrictive but in a good way that allows the flavor to really come through even on the more subtle vape juices. My only issue is the wicking once you find that golden amount of cotton it’s amazing but it takes quite a bit of trial and error to find that perfect zone.

    Helpful(0) Unhelpful(0)You have already voted this
  21. Jason Colvard

    Awesome vaping experience! Once you get the wicking down, it’s a breeze to build and a very satisfying experience. Can chain vape until I’m blue in the face with no degradation in the flavor. Pretty decent mix of clouds and flavor, depending on how you build it. Good call to check out some videos to get the build right or it could probably be an awful mess though. A lot of people have issues, you need some room to let the air flow or it’s a hard draw. Less is more as far as the length of the mesh. got one built at .14, and one built at .118. the .118 has better air flow, but the .14 has nominally better flavor. MVS ships fast and is reliable. got two because used ebay to save a couple bucks, regret it, as i got my MVS in three days, and the ebay in 15.

    Helpful(0) Unhelpful(0)You have already voted this
  22. Vincent Cooper

    “The Tank is small & has a small fill hole & you must use a fill bottle with a small nipple that will make it past the seal. Not enough Airflow for me, & too much drag with the amount of cotton you need to Wick the Mesh properly.
    The Mesh is working good for me & gives a lot of Flavor. but only a small Cloud & too much drag. A Duel Coil build can be done on this Deck & I’ve seen Videos on You Tube of how to do it & I’ll try that next. I like Mesh RDA’s as a Squonker, & they work good if you wick them correctly. At the moment I’m not that impressed with this RTA. There are much better ones that use Mesh & have more room & have a better build Deck. I will try a Duel Coil Build & see what happens. One Video stated it works best with a Duel Coil Build & it can be done if done right.”

    Helpful(0) Unhelpful(0)You have already voted this
  23. Brandon S

    “Thing is constantly spitting, flooding out, and in general being a PITA. I tried it with almost every style of wicking I could think up or watch on YouTube. Still sucks, especially when you break ‘vacuum’ to refill it.
    I wish I could go back in time and pick something else.
    I would not recommend this to random people in a vape forum/fb group, and I would lose friends and family if I recommended the POS to them”

    Helpful(0) Unhelpful(0)You have already voted this
  24. Elizabeth

    “This RTA surpasses my expectations! I love the Mesh RDA and the RTA is similar in taste, but with slightly more restricted air flow than the RDA.
    The build and wick is very unforgiving compared to other RTAs. It must be done right or it is a hellish vape! Keep the mesh ring small and the top of the cotton bowtie should never be stuffed into the mesh ring as shown on a couple reviews. The perfect build and wick is done by TheVapingPharoah TVP on his YouTube channel. Read the comments too.
    This RTA does flood a bit when top filled, but the gurgling disappears quick when doing the initial “”blow out”” before drawing in the vapor. It should be blown out once through the airflow before drawing in, just like the RDA, or it is much harsher.
    No leaks so far. Works great in TC.This RTA does gobble the juice, even with the 4 ml glass on, but it works very nicely. I love it!”

    Helpful(0) Unhelpful(0)You have already voted this
  25. Donald Smith

    “Nice rta
    I have this in ss and black. They work so good had to get two.”

    Helpful(0) Unhelpful(0)You have already voted this
  26. Donald Smith

    “Nice rta
    I liked this rta so much i got both colors!👌🏿👌🏿👌🏿”

    Helpful(0) Unhelpful(0)You have already voted this
  27. NoRmDeeZeVapes

    “Should of could of would of
    Should have kept the horizontal platform like the RDA. The theimia was able to.”

    Helpful(0) Unhelpful(0)You have already voted this
  28. Adam

    “Good rta
    Innovative. Airflow is a little restrictive. Excellent flavor from mesh coil. Wicking is kind of tricky.”

    Helpful(0) Unhelpful(0)You have already voted this
  29. Chris V

    “Mesh
    Mesh rta has good flavor not very good airflow but a decent tank”

    Helpful(0) Unhelpful(0)You have already voted this
  30. Kevin

    “This review is about eightvapes incredible customer service!
    I had problems with he post screws on my mesh RTA so Eightvape promptly offered me a return for a different product of my choice ! Now that’s A plus customer service! Can’t comment to much on the Mesh RTA it looked like a cool idea but as other said it doesn’t seem to have a very restrictive draw so if you like airflow this is not for you !”

    Helpful(0) Unhelpful(0)You have already voted this
  31. Mark Brock

    “My Wicking thoughts through trial & error
    -A couple of rules to live by when learning to wick this flavor beast.-
    #1 If you are turning blue in the face (as was I before getting it right) when trying to get a mouth pull through it be sure to clip your cotton below the top of the post clamps because I found that to be the reason I was having problems it was choking off my airflow. I cut mine just above the mesh coil.
    #2 To stop the juice spit up do trick #1 mentioned (won’t have to suck that hard when clipping your cotton below the post) and make sure when you pull your cotton down through the mesh coil to completely cover all the juice holes that feed the cotton from the bottom of the base. That will stop the flooding.
    #3 I have also noticed when I do break the tank apart to clean and rewick it, it can get flooded Just get a piece of papertowel wrap around the top of the airflow of the tank when you reassemble the tank and blow hard to clear out the air chamber because it gets pressurized when breaking the tank apart and the pressure pushes juice into the air chamber. Causing some flooding and gurgling.”

    Helpful(0) Unhelpful(0)You have already voted this
  32. Mark Brock

    “4th Time really was the charm
    Yep after 3 times of trying the Vandy Vape Mesh 24 I was ready to throw it in the trash. Getting light headed trying to suck through the darn thing and when I did finally get something it was a warm mouthful of ejuice not vapor and flavor…yuck. But after watching a few more videos and my own trial and error I gave it a 4th try and man am I glad I did. It was all due to the way I was wicking it and now I have it down to a T the flavor is RDA level good. So good in fact it has retired every other RTA etc. I have because it’s that good.
    It’s like my favorite juices are now on steriods with the Mesh RTA and my favorite RTA’s (Engine, Engine Nano, and Zeus) are now officially been retired (just bought 2 new Engine Nano’s before mastering the wicking on this beast).
    WOW I never knew what I was missing until I got the wicking right on this thing.
    If your having trouble don’t give up watch videos and experiment with trial & error and learn to wick the Mesh RTA you’ll be glad you did”

    Helpful(0) Unhelpful(0)You have already voted this
  33. Kurt K

    “This thing is defenetly for the MTL Vaper’s
    If you like a smooth yet restricted vape with lots of flavor this thing is for you! At first I really didn’t like this RTA, I thought for sure after the Mesh RDA I would love it but they are 2 totally different types of vaping, after some time and testing tho I really must say the flavor is unbelievably good and its nice to have a MTL hitter around the house as well!”

    Helpful(0) Unhelpful(0)You have already voted this
  34. Carolyn

    “great tank
    great flavor low watts. super easy to rebuild. lossen 4 screws, slip mesh in, tighten screws add cotton, prime, close and fill. not one dry hit. love love love it”

    Helpful(0) Unhelpful(0)You have already voted this
  35. andy

    “vandy vape rta
    save your money…spit back galore..bad airflow”

    Helpful(0) Unhelpful(0)You have already voted this
  36. Frank

    “Mesh 24mm RTA, Vandy Vape
    Mesh 24mm RTA

    Best flavor and very quality hits ( just do not put cotton to high) and EightVape is the best.”

    Helpful(0) Unhelpful(0)You have already voted this
  37. Cory Brown

    “Terrible Needs to be listed as a MTL
    This thing has the worst air flow ever. Needs to be listed as MTL. Seriously pissed that it was not. Come on 8 vape”

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    Vapecp
    Login/Register access is temporary disabled
    Compare items
    • Total (0)
    Compare
    0